0512-66717681

How do you bend PC board?

2021.03.31

How to bend PC board? Many people will have doubts when they first use this material for bending. The principle of bending PC board is actually the same as that of sheet metal, but the difference between PC and sheet metal lies in that PC board has plasticity such as elasticity, unlike sheet metal which is easier to shape. However, with more practice, you will gradually gain experience. First, when choosing PC board, try to select brand-new material, because the PC board of brand-new material is less likely to crack during bending, especially in cold weather. You need to add a little heat, otherwise it is very likely to crack. Adding a little heat also helps to determine the angle. Of course, the control of the heat temperature is very important. It needs to be controlled by a professional technician. For bending PC board, we should first draw the unfolded diagram according to the product drawing. During the drawing of the unfolded diagram, each bend and transition area needs to be scaled. This scaling is a process of long-term accumulation. Different thicknesses have different scalings. If you handle it well, the size of the finished product will be better and the tolerance will be smaller. On the contrary, it will cause a large error. The drawing needs to be completed first, then draw lines at each bending point, add a little heat, and directly bend it on the bending machine. The slot angle and depth of the general bending machine are standard for sheet metal, but for plastic board bending machines, the slot angle and depth need to be modified. Only in this way can the angle be bent correctly. Place the material on the bending machine, align it with the bending line, and then bend. Bend to the desired angle. When pressing, the technician needs to decide whether to press more or less based on experience. It requires feeling and experience to control. Generally, plastic board angles need to be over-bent because the stress after bending cannot be released immediately. It will rebound slowly. Over-bending can make the rebound reach the desired angle or a similar angle. After bending, it needs to be placed for 1-2 days. After the stress rebound force is completely released, it needs to be bent again and adjusted for the angle. This is the method of bending PC board. Suzhou Zhongweike Precision Plastic Technology can perform excellent bending processing on the plates. If you have PC board bending products, you can consult us to help you solve the processing and bending of products.

Previous:What is polycarbonate sheet?

Next:Why can't we tell the difference between acrylic sheet and tempered glass? Is it really more durable than glass?