All products
Category Introduction
The Zhongweike PC diffusion series offers a wide range of products, including thick plate diffusion plates, diffusion films, reflective films, anti-glare diffusion films, diffusion sheets, with thicknesses ranging from 0.2 to 5.0. The thickness is complete, with single polishing and double-sided frosted surfaces, as well as smooth surfaces. The light transmittance includes low transmittance, medium transmittance, high transmittance, and ultra-high transmittance, with the highest being 90% at a thickness of 0.2. The thicknesses are 0.2, 0.3, 0.5, 0.8, 1.0, 1.2, 1.5, 2.0, 3.0, 4.0, 5.0, etc. The flame retardant grades include UL-94V2 and UL94-V0. Besides, there is also the UGR anti-glare diffusion film for specialized fields, with stable quality and performance. The diffusion series produced by our company has excellent quality and high cost-effectiveness, and is widely used in various fields such as lighting, LED, LCD, optoelectronics, etc.
一、PC light diffusion plate
The "Zhongweike" PC light diffusion plate is a high-quality lighting fixture component produced by Zhongweike Optics using Korsun's optical-grade polycarbonate material in a dust-free workshop, in compliance with international environmental protection standards. It offers over 30 different products with various light transmittance and haze levels, with supply thickness ranging from 0.2mm to 4.0mm. It provides UL94-V2&VO, TP(a) flame retardant grades, 5-year anti-aging, UGR anti-glare series, etc. for global high-quality lighting fixtures.
Product Principle: The PC diffusion plate is an optical material that undergoes special surface treatment combined with light diffusion additives to transform point light sources into surface light sources and achieve uniform light distribution. Midvico Optics designs and processes the surface structure and formulation of the diffusion plate to enable multiple reflections and refractions of the incoming light, thereby changing the light conduction and achieving the effect of uniform and diffused light.
二、Application fields
1. Various types of LED lighting fixtures, including LED recessed lights, panel lights, high ceiling lights, and linear lights.
2. Outdoor advertisements, billboard advertisements, etc.
3. The LED backlight module and other fields related to optoelectronic display.
三、Product performance:
1、Transparency
The Zhongweike PC diffusion panel is made of newly imported optical-grade materials, featuring excellent optical performance. The light transmittance is over 80%, and can reach up to over 92%.
2、Impact resistance
PC is the plastic with the best comprehensive performance among all thermoplastics. Even at high temperatures, its latent deformation is minimal and its stress mitigation is also small. The light diffusion plates made of PC have excellent physical and mechanical properties, and maintain stable performance over a wide temperature range (-40°C to +120°C) for a long time. The impact resistance is 200 times stronger than that of traditional glass and 30 times stronger than acrylic. It is known as "unbreakable glass" and "sound steel". PC sheets demonstrate excellent impact resistance when subjected to hail impacts (such as storms, snow, ice, etc.) and various sports ball impacts. Under these conditions, both glass and acrylic are brittle and hard, while PC sheets are flexible. For example, only small serrated gaps or deformation in the compressed area occur, rather than cracking.
3、Anti-UV property
The Zhongweike PC diffusion plate is treated with special anti-ultraviolet technology to ensure its stability against ultraviolet radiation. This product has long-term weather resistance and will maintain its original optical performance even after long-term use. It is not prone to rapid aging due to ultraviolet exposure, and thecolor of the product itself is also unlikely to turn yellow.
4、Thermal stability
The Zhongweike diffusion plate can adapt to various harsh weather conditions ranging from extreme cold to high temperatures. The low-temperature brittleness temperature is -100°C, the high-temperature softening temperature is 146°C, and under long-term load conditions, the allowable temperature range is -40°C to +120°C, while the short-term load temperature range is -100°C to +135°C. Under these conditions, other materials would undergo significant deformation or even complete failure, but the Zhongweike PC board still maintains excellent physical properties.
5、Thermal properties
Coefficient of linear expansion: PC is one of the synthetic resins with a relatively low coefficient of linear expansion. The coefficient of linear expansion varies slightly in different directions of the sheet, averaging 0.065mm/m.°C. Thermal conductivity K: refers to the heat transfer rate through an area of 1 square meter of transparent material in units of time when there is a temperature difference of 10°C between the two sides. Unit (W/m k). The thermal conductivity of PC sheets differs significantly from that of general synthetic resins, being 1/4 of that of glass, 1/300 of iron, 1/1000 of aluminum, 1/12000 of copper, and is a material with good thermal insulation properties. The insulation effect of multi-layer hollow sheets is particularly excellent.
6、Flammability resistance, fire resistance
The PC material itself has flame-retardant properties. The ordinary fire resistance grade is UL94-V2. The medium-voltage PC diffusion board, after formula adjustment, can reach UL94-V0 grade, which complies with TP (a) standard. It automatically extinguishes within 10 seconds without any dripping.
7、Chemical resistance
Zhongweike panels can withstand the erosion of various weak organic acids, inorganic acids, vegetable oils, neutral salt solutions, aliphatic hydrocarbons and anhydrous alcohol at room temperature.However, the solar panels dissolve in chlorinated alkanes, slightly dissolve in aromatic hydrocarbons and ketones, can be damaged by alkalis, and will swell in water and methanol.
The following table lists the names of chemicals that do not mix with PC panels. Coexistence with these chemicals will damage the panels.Chloroethylene
| 1.Acetaldehyde | 2.Acetone | 3.Ammonia water | 4.Saturated ammonium fluoride | 5.Saturated ammonium sulfide |
| 6.Phenol | 7.Benzene | 8.Cement | 9.Benzoic acid | 10.Benzoic alcohol |
| 11.Dichlorocarbon | 12.Carbon monoxide | 13.Chlorobenzene | 14.Chloroform | 15.Saffron |
| 16.Dimethylmethylthiamine | 17.Ethylamine | 18.Ether | 19.Chloroethylene | 20.Petroleum |
| 21. Styrene | 22. Phenol | 23. Benzyl alcohol | 25. Toluene | 26. Tetrafluoromethane |
| 27. Ketone | 28. Dichlororane | 29. Nitric acid | 30. Fluorinated sodium chloride | 31. Oil dripping from the bent pipe |
Furthermore, it must be noted that the rubber strips used together with the sheet materials should be made of chloroprene rubber with a Shore hardness of around A65, EPT or EPDM. For the sealing purposes, it is recommended to use neutral silicone structural sealant. Before using other materials, please test their compatibility with the PC material.
Cautionary Notice:Because currently, many types of silicone sealant on the market do not meet the requirements for panel construction and installation. They cause severe corrosion to the panels or their performance does not match the lifespan of the panels, which eventually leads to cracking or leakage of the panels. Therefore, we recommend that you use sealant that meets the following standards:
(1) Neutral silicone structural sealant, without pungent odor, to ensure no corrosion to the panels or metals;(2) Low elastic modulus;
(3) Excellent bonding strength, which will not change due to the invasion of wind, snow and rain, effectively guaranteeing the sealing effect.
(4) It has good extrudability and flowability within the temperature range of -20℃ to 40℃. It can be directly applied by extruding with a caulking gun;
(5) During the curing process, it has low shrinkage and does not wrinkle;
(6) After curing, it will not become brittle, harden or crack at -40℃ low temperature, and will not soften, degrade or crack at +150℃ high temperature, always maintaining good elasticity.
2. Product physical properties
<Physical properties | Organization | Indicators | Testing method |
<Full-line transmittance | % | 60-95 | ASTM D1005 |
Transparency/Opacity | % | 95±2 | ASTM D1005 |
>Hydrophilicity | % | <0.4 | JIS K7209 |
>Heat shrinkage rate | % | <1 | ASTM D1204 |
Tensile elongation (longitudinal) | % | ≥60 | JIS K7161 |
Tensile elongation (transverse) | % | ≥50 | ASTM D882 |
Tensile strength (longitudinal) | MPa | ≥110 | ASTM D882 |
Tensile strength (transverse) | MPa | ≥120 | ASTM D882 |
Vica softening temperature | ℃ | 136 | ASTM D1525 |
Surface resistance | Ω | ≦1014 | ASTM D257 |
Density | g/cc | 1.2 | ASTM D792 |
Note: The above data represent the test results of typical samples. The transmittance can be adjusted according to your requirements.
