0512-66717681

What are the advantages and disadvantages of acrylic panels? How are acrylic panels attached?

2022.06.24
Acrylic panels are probably familiar to everyone. Acrylic is a type of specially treated organic glass. It is favored by many consumers due to its good transparency, rich colors, and aesthetic features. So, what are the advantages and disadvantages of acrylic panels? How are acrylic panels glued? Let's follow the editor to find out!
Advantages and disadvantages of acrylic panels
1. Advantages
1) High hardness
The main advantage of acrylic panels is their high hardness. The hardness level is one of the indicators to measure the quality of the board. Good acrylic panels can have a hardness index of about 89 degrees, and acrylic boards have particularly good adaptability and can be used in environments exposed to sunlight and rain for a long time, with good aging resistance.
2) Good transparency and strong light transmission
The transparency and light transmission of acrylic panels are both very good, reaching over 92%. This is because during production, the transparency and pure whiteness of the panels can be ensured.
3) Easy maintenance and strong plasticity
The maintenance of acrylic panels is very convenient. It is very easy to clean, and it can be cleaned with water or soap and a soft cloth. Moreover, acrylic panels have strong plasticity and are easy to be processed into shapes.
4) Strong impact resistance and rich colors
Compared with other boards, acrylic panels have stronger impact resistance, which is about 10 to 15 times that of ordinary glass, and have very high safety performance. They also have various varieties and are suitable for different spaces for decoration.
2. Disadvantages
1) Although acrylic panels have many advantages, they are expensive. The price is several times or even more than that of ordinary glass panels.
2) Acrylic panels are an organic material and have a certain brittleness. Transportation is troublesome, and they cannot be overlapped during transportation, otherwise, the panels are likely to break.
How to glue acrylic panels
1) Vertical surface bonding
Vertical surface bonding is the most widely used bonding technology in the production of acrylic products and is widely used. When bonding, the surface needs to be wiped clean. If the acrylic panel is less than 3mm in thickness, it can be directly injected with the Nippon bonding agent evenly and slowly to complete the bonding.
2) Alignment
Place the two acrylic panels to be aligned on the operation table horizontally, close them together, and stick a tape at the bottom to leave a 0.3mm-wide gap for applying the Kureon bonding agent. Use an injection needle to inject the Kureon bonding agent evenly and slowly from the gap until it is fully filled. Wait for it to cure and then remove the tape.
3) Inclined surface bonding
When bonding an inclined surface, it is necessary to maintain a 90-degree angle to the template to prevent the bonded surface from shifting. Then, inject the Kureon bonding agent evenly and slowly when it is cured, and then remove the template.

Previous:Why can't we tell the difference between acrylic sheet and tempered glass? Is it really more durable than glass?

Next:Is the PC roof suitable for a sunroom? Is it good to use PC panels for a sunroom? Learn the pros and cons in just 3 minutes.